Pin Spanners
Description
If you have ever used a Pin Spanner you have probably had one slip out of the hole. This usually causes damage. RT Pin Spanners have a unique pin design with a reverse taper to keep them from popping out during use.
Each pin set is double sided. Note-the sizes listed are of the actual pin diameter. If they fit in the hole they can be used however we recommend using the largest pin size that fits in the hole to avoid breakage of the pins.
3 pins - 6 sizes total:
2.6/3.3, 3.8/4.3, and 4.8/5.3mm
Replacement Pins sold in pairs.
| Item Code | Description | |
| TMPS 2633 | 2.6 & 3.3 Spanner | |
| TMPS 3843 | 3.8 & 4.3 Spanner | |
| TMPS 4853 | 4.8 & 5.3 Spanner | |
| TMPS P2633 P | 2.6/3.3 Replacement Pins |
|
| TMPS P3843 P | 3.8/4.3 Replacement Pins |
|
| TMPS P4853 P | 4.8/5.3 Replacement Pins |
We also offer other Pin Spanners specific to their applications including:
TSPS Series - for WP PDS Compression Needles
TFCH PS24050 - WP KTM 65 Fork Seal Heads
TFCW PS38048 - WP 4CS Fork Caps
TFCW 50H - WP 50mm Hex & 29 x 4.8 Pin Spanner Fork Caps
