SK INSTALL G3S YAMAHA RAPTOR 250 FRONT

G3-S FRONT MOUNTING INSTRUCTIONS
YAMAHA RAPTOR 250
 

These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Remove stk shock absorbers.

2.    Install Race Tech shock absorber with 90° fitting facing out. The hydraulic line should face the front of the ATV. The Shock Reservoirs will mount to the frame rail as shown.

3.    Mount the reservoir using the rubber pads and clamps. The mounting clamps should be located as far apart as possible and tightened so that the reservoir cannot move under any riding conditions.

4.    Torque shock bolts to factory specifications. 

The shock is preset for you. Please check the sag before you ride.