G3-S Mounting Instructions
2008-2010 Kawasaki Ninja 250
These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type. The preset adjustments are listed on your Setup Sheet.
After mounting the shock please check the Sag. Click here for details.
Note: Click on the images to enlarge.
1. Remove the stock shock absorber according to the procedures in the Kawasaki service manual.
2. Mount the G3-S into position with the Line and Reservoir facing the back of the motorcycle.
3. Install the top and bottom Bolts and torque to factory specifications.
4. Mount G3-S Shock Reservoir to back left side passenger Peg Bracket Mounting hole as shown. Be sure to angle Reservoir up as far as possible for proper clearance.
Have Fun! Go Ride!
The shock is preset for you. Please check the sag before you ride.