G3-S MOUNTING INSTRUCTIONS
1. Remove the stock shock absorber following the procedure in your Honda Service Manual.
2. Replace the stock shock with your Race Tech Shock Absorber.
3. Mount G3-S Shock as shown. Torque upper and lower Shock Bolts to factory specifications.
4. Install G3-S Hydraulic Preload Adjuster using the same mounting position as the Stock unit.
5. Inspect all mounting points for proper torque. Be sure that the Hydraulic Line cannot be damaged during operation.
Have Fun!! Go Ride!
The shock is preset for you. Please check the sag before you ride.